Jivi Flash File Download For all Models

Download Jivi Flash File, Stock ROM For all Models, Official Indian Firmware File. Here the firmware or flash file ROM of all models of Jivi is available. And the drivers and Flashtools of all are also given. With which you can easily flash any model of Jivi Phones. Below is how to flash Jivi Phones, install the driver. Which is easily shown. All the links given below are direct download links, you can easily download all files without any password.

Download Jivi Flash File,(Stock ROM) For all Models

Jivi ModelLink
Jivi Xtreme XT309 PlusFirmware
Jivi Xtreme XT84Firmware
Jivi X606Firmware
Jivi X570 SelfieFirmware
Jivi X570Firmware
Jivi X84Firmware
Jivi X57iFirmware
Jivi X48Firmware
Jivi X30Firmware
Jivi X3i PlusFirmware
Jivi X3iFirmware
Jivi T3000Firmware
Jivi T201Firmware
Jivi Revolution TNT3Firmware
Jivi Prime P4442Firmware
Jivi Prime P444Firmware
Jivi Prime P390Firmware
Jivi Prime P300Firmware
Jivi Prime P30Firmware
Jivi N9030Firmware
Jivi N9003Firmware
Jivi N2244Firmware
Jivi N210Firmware
Jivi N120Firmware
Jivi N93Firmware
Jivi JSP-Q65Firmware
Jivi JSP47Firmware
Jivi Energy E12Firmware
Jivi Energy E3Firmware
Jivi JSP29Firmware
Jivi AJ3Firmware
Jivi JSP56Firmware
Jivi JV-JSP56Firmware
Jivi JSP20Firmware
Jivi JSP11Firmware
Jivi JFP R21Firmware
Jivi JV 12MFirmware

How to Flash From PAC File:

Download Jivi Flash File and Install SPD Driver, Charge the phone 30% before flashing.

  1. First of all download the above files.
  2. Extract All File From zipping Or Rar File.
  3. Open the FlashTool folder and run UpgradeDownload.exe File
  4. After that click on the load packet button and select a PAC file from the given flash file folder.
  5. Wait for some time till the file is loaded
  6. Then click on the download button
  7. To connect the phone to the tool, put the phone in download mode.
  8. Switch off the phone and press the volume up and down simultaneously and Plugin Data Cable.
  9. Flashing will start waiting until flashing occurs.
  10. During flashing the data cable may not go out of the phone or the phone can go into the dead mode.

How to Flash MTK CPU From Scatter File:

Download Jivi Flash File and Install Mediatek Driver, Charge the phone 30% before flashing.

  1. First download all the files above
  2. Extract All File From Zip File.
  3. Open the FlashTool folder and run flashtool.exe.
  4. After that open, the tool, click on choose in the download agent tab.
  5. And select the MTK_AllInOne_DA.bin file from the FlashTool folder.
  6. After that click on choose in the scatter-loading file tab and select the scatter file from the flash file folder.
  7. Then click on the download button
  8. Then switch off the phone to connect the phone to Flashtool.
  9. According to the boot mood of the phone, press the button and connect the data cable with the phone.
  10. The option of the green tick will come after flashing is complete.

Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into dead mode.

If your phone is in dead mode, the logo hangs, or the phone is locked, after flashing from this file all the problems will be fixed simultaneously and if you are locked with FRP then flashing will unlock it.

If your phone has an FRP lock and wants to remove the FRP lock without flash then you can unlock it with the help of this file. Follow these steps given below to unlock FRP only.

How to FRP Bypass:

  • Open the sp flash tool and select the scatter file from the given flash file.
  • Click on the above format
  • After that click on manual format flash
  • Open the file named scatter in the firmware folder and search for FRP by pressing control + F
  • Copy the “Begin address” and “format Length” and paste in the manual option
  • (Ex: Begin address 0x2d88000 and Format Length 0x100000)
  • After that click on the Start Play button and connect the phone to your computer.
error: Content is protected !!